linksys extender setup

Linksys Extender Setup : How to Setup Linksys Range Extender

Linksys extender setup is a remedy to all WiFi-related issues. Range extenders, also known as WiFi boosters, are intended to extend the coverage area of router. Once you set up the extender, there is no need to roam around searching for strong wireless signals. Connect the computer or laptop to a local area network. Pull up any browser and type in the router’s IP address. Enter security settings to match with the configuration of router. After that, you need to type the password and click on save settings. Disconnect the computer from local network and wait for some time.

Go to web address for getting started with Linksys extender setup. It is the default page for Linksys extender login. However, before accessing the login page, make sure to have correct username and password to enter.

Linksys Extender Setup Guide

Follow the steps below to install and configure Linksys WiFi range extender:

  • Set up a strong connection between Linksys extender and computer or laptop.
  • Turn on the range extender.
  • Wait for a couple of minutes and then power on the computer as well.
  • Make sure to provide the constant power supply to extender throughout Linksys extender setup process.
  • Don’t forget to check the status of extender linksys from time to time.
  • Find a web browser on computer.
  • If there is no browser installed on your device, download the one from a reliable source.
  • After that, open a new window in browser and enter
  • Log in to the extender using default username and password.
  • A new screen will appear.
  • Click on manual radio button.
  • Set up the settings like SSID, Passphrase and much more.
  • Finally, hit save settings button.

After completing the installation steps, connect Linksys Extender to smart devices like computer, laptop, smartphone or tablet and start accessing the internet without any buffering. In case you find any difficulty while setting up Linksys Extender, do not worry at all as we are always available for help. Just dial our toll-free number 1-844-748-5637 and free yourself from all technical issues.

How does Linksys Range Extender work

In order to set up a Linksys extender properly, you should know about LED lights, buttons and ports. There are 3 main panels on extender:

  1. Front Panel

The front panel on extender contains a LED light which gives you information about power and WPS setup. If it is blinking white, it means that the extender is resetting to default settings or updating the firmware. On the other hand, solid white color of this light shows that the extender is all set to use.

  1. Back Panel

This panel of extender includes Ethernet Port, Audio Port, WiFi Protected Setup button and Power Switch. Through Ethernet Port, multiple wired devices can be connected to the extender. If you want to connect the speakers to extender, use the Audio Port. WPS button is used for Linksys extender setup. Power Switch is used to turn on or off the extender.

  1. Bottom Panel

There is only one button at the bottom panel of extender i.e. Reset. Pressing this button will restore all the default extender settings and clear customized settings. However, you can also reset the extender via web user interface namely extender.linksys. Launch an internet browser, access Linksys extender login page and click on factory default option.

Linksys Extender Login

To set up Linksys extender, you have to access web address which opens default Linksys extender login page. Enter username and password to continue. But if the login page shows an error saying ‘password is incorrect’ or something else, check the manual that comes embedded with extender linksys on the purchase. The manual contains the default login credentials for Linksys extender login.

Keep in mind that these details will work only if you are accessing extender.linksys for the first time or never changed default credentials.

In case you are unable to access Linksys extender login page, contact our technical experts at toll-free 1-844-748-5637. We are committed to achieve 100% customer satisfaction with the least response time.

Linksys Extender Router Login

As the router should be connected to extender for setup, so there is a need to log in to router as well. Linksys extender router login page is meant for accessing the router. From here, you can change the settings of access point to match them with extender, set up security measures and a lot more. The procedure to access Linksys extender router login is very simple. Just open a browser and navigate to Type the username and password in provided fields. Once done, access the wireless home or office router and connect it to Linksys extender.

Disclaimer: is an independent customer service provider for networking gadgets. We do not affiliate with any third-party organization. The usage of any third-party images, brands, logos, products and trademarks are just for referential purpose.